All MIBs › DGS-3620-28SC-L2MGMT-MIB › swL2PVIDAutoAssignmentState
swL2PVIDAutoAssignmentState
Module: DGS-3620-28SC-L2MGMT-MIB
OID (symbolic): DGS-3620-28SC-L2MGMT-MIB::swL2PVIDAutoAssignmentState
OID (numeric): 1.3.6.1.4.1.171.11.118.2.2.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID.
If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'.
What is swL2PVIDAutoAssignmentState?
This read-write setting controls whether a port's PVID (native/untagged VLAN) updates automatically to match VLAN membership changes, or must be set explicitly by the admin; when enabled, adding a port as untagged member of VLAN X updates its PVID to X, and removing it reverts the PVID to the default VLAN. An admin disables this on switches where they want tight, explicit control over each port's native VLAN regardless of untagged membership changes elsewhere.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.118.2.2.2.2 snmpwalk -v2c -c public <target> DGS-3620-28SC-L2MGMT-MIB::swL2PVIDAutoAssignmentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.118.2.2.2.2.1 snmpget -v2c -c public <target> DGS-3620-28SC-L2MGMT-MIB::swL2PVIDAutoAssignmentState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.118.2.2.2.2.1 i <value>
Start monitoring D-Link DGS-3620-28SC switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-3620-28SC-L2MGMT-MIB::swL2PVIDAutoAssignmentState OID value, configure state conditions and alerts, and monitor any D-Link DGS-3620-28SC switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.118 | dlink_Dgs3620Proj | SWDGS3620PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.118.2 | dlink_Dgs3620Proj_Dgs3620_28SC | SWDGS3620PRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.118.2.2 | swL2MgmtMIB | DGS-3620-28SC-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.118.2.2.2 | swL2VLANMgmt | DGS-3620-28SC-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.118.2.2.2.2 | swL2PVIDAutoAssignmentState | DGS-3620-28SC-L2MGMT-MIB |