DGS-3120-48TC-L3MGMT-MIB :: swL3IpStaticRouteMask

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-3120-48TC-L3MGMT-MIB › swL3IpStaticRouteMask

swL3IpStaticRouteMask

Module: DGS-3120-48TC-L3MGMT-MIB

OID (symbolic): DGS-3120-48TC-L3MGMT-MIB::swL3IpStaticRouteMask

OID (numeric): 1.3.6.1.4.1.171.11.117.1.4.3.2.5.1.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class.

Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.

What is swL3IpStaticRouteMask?

This is the network mask applied to swL3IpStaticRouteDest to determine which destination addresses match this static route; the DESCRIPTION requires it be consistent with the destination address on write, and on systems without arbitrary-mask support the agent derives it from the address's IP class instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.117.1.4.3.2.5.1.2
snmpwalk -v2c -c public <target> DGS-3120-48TC-L3MGMT-MIB::swL3IpStaticRouteMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.117.1.4.3.2.5.1.2.1
snmpget -v2c -c public <target> DGS-3120-48TC-L3MGMT-MIB::swL3IpStaticRouteMask.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> swL3IpStaticRouteMask.1

Start monitoring D-Link DGS-3120-48TC switch (L3) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-3120-48TC-L3MGMT-MIB::swL3IpStaticRouteMask OID value, configure state conditions and alerts, and monitor any D-Link DGS-3120-48TC switch (L3) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.117dlink_Dgs3120ProjSWDGS3120PRIMGMT-MIB
1.3.6.1.4.1.171.11.117.1dlink_Dgs3120ProjModelSWDGS3120PRIMGMT-MIB
1.3.6.1.4.1.171.11.117.1.4dlink_Dgs3120Proj_Dgs3120_48TCSWDGS3120PRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.117.1.4.3swL3MgmtMIBDGS-3120-48TC-L3MGMT-MIB
1.3.6.1.4.1.171.11.117.1.4.3.2swL3IpMgmtDGS-3120-48TC-L3MGMT-MIB
1.3.6.1.4.1.171.11.117.1.4.3.2.5swL3IpStaticRouteTableDGS-3120-48TC-L3MGMT-MIB
1.3.6.1.4.1.171.11.117.1.4.3.2.5.1swL3IpStaticRouteEntryDGS-3120-48TC-L3MGMT-MIB
1.3.6.1.4.1.171.11.117.1.4.3.2.5.1.2swL3IpStaticRouteMaskDGS-3120-48TC-L3MGMT-MIB