All MIBs › DEVICE-MIB › systimeStandbyCSUseInterval
systimeStandbyCSUseInterval
Module: DEVICE-MIB
OID (symbolic): DEVICE-MIB::systimeStandbyCSUseInterval
OID (numeric): 1.3.6.1.4.1.5812.1.3.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the time interval used to reset the Standby Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour.
What is systimeStandbyCSUseInterval?
This is the reset interval in hours (1-96, default 1) for the standby clock source's used-count, paralleling the primary/secondary use-interval settings. Admins adjust it to control how often the standby module's retry counter resets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5812.1.3.20 snmpwalk -v2c -c public <target> DEVICE-MIB::systimeStandbyCSUseInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5812.1.3.20.1 snmpget -v2c -c public <target> DEVICE-MIB::systimeStandbyCSUseInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5812.1.3.20.1 i <value>
Start monitoring chassis-based network devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEVICE-MIB::systimeStandbyCSUseInterval OID value, configure state conditions and alerts, and monitor any chassis-based network devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5812 | coriolisMibs | CORIOLIS-MIB |
| 1.3.6.1.4.1.5812.1 | device | CORIOLIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5812.1.3 | systime | DEVICE-MIB |
| 1.3.6.1.4.1.5812.1.3.20 | systimeStandbyCSUseInterval | DEVICE-MIB |