All MIBs › DES3225G-MIB › swPortCtrlFlowCtrlState
swPortCtrlFlowCtrlState
Module: DES3225G-MIB
OID (symbolic): DES3225G-MIB::swPortCtrlFlowCtrlState
OID (numeric): 1.3.6.1.4.1.171.11.24.3.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full duplex mode.If the port is set Auto-negotiation enabled, the object stands for flow control capability. The results should be referred to swPortInfoFlowCtrlStatus object. If the port is in force mode, this objects is simply used to set the flow control state (on/off). In force mode, if you change it from enabled to disabled state, it will work after next system restart. But the flow control changing from disabled to enabled state, it will immediately work.
What is swPortCtrlFlowCtrlState?
Enables or disables IEEE 802.3x flow control on a port, which only actually functions in full-duplex mode. If the port auto-negotiates, this setting represents capability advertised rather than guaranteed behavior — check swPortInfoFlowCtrlStatus for the real outcome, and note that disabling flow control in forced mode only takes effect after the next restart.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.24.3.2.1.6 snmpwalk -v2c -c public <target> DES3225G-MIB::swPortCtrlFlowCtrlState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.24.3.2.1.6.1 snmpget -v2c -c public <target> DES3225G-MIB::swPortCtrlFlowCtrlState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.24.3.2.1.6.1 i <value>
Start monitoring D-Link DES-3225G switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3225G-MIB::swPortCtrlFlowCtrlState OID value, configure state conditions and alerts, and monitor any D-Link DES-3225G switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.24 | des3225gSeries | DES3225G-MIB |
| 1.3.6.1.4.1.171.11.24.3 | swPortPackage | DES3225G-MIB |
| 1.3.6.1.4.1.171.11.24.3.2 | swPortCtrlTable | DES3225G-MIB |
| 1.3.6.1.4.1.171.11.24.3.2.1 | swPortCtrlEntry | DES3225G-MIB |
| 1.3.6.1.4.1.171.11.24.3.2.1.6 | swPortCtrlFlowCtrlState | DES3225G-MIB |