All MIBs › DES3225G-MIB › swDevCtrlStpState

swDevCtrlStpState

OID (symbolic): DES3225G-MIB::swDevCtrlStpState

OID (numeric): 1.3.6.1.4.1.171.11.24.1.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object can be enabled or disabled spanning tree algorithm during runtime of the system. When the device is in 802.1Q Vlan mode, this object will be enabled and cannot be disabled.

What is swDevCtrlStpState?

A read-write switch to enable or disable the Spanning Tree Protocol algorithm device-wide at runtime. Note it becomes locked enabled and can't be disabled once the device is running in 802.1Q VLAN mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.24.1.2.1
snmpwalk -v2c -c public <target> DES3225G-MIB::swDevCtrlStpState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.24.1.2.1.1
snmpget -v2c -c public <target> DES3225G-MIB::swDevCtrlStpState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.24.1.2.1.1 i <value>

Start monitoring D-Link DES-3225G switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3225G-MIB::swDevCtrlStpState OID value, configure state conditions and alerts, and monitor any D-Link DES-3225G switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.171	d_link	DE1500-MIB
1.3.6.1.4.1.171.11	dlink_mgmt	DES2218-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.171.11.24	des3225gSeries	DES3225G-MIB
1.3.6.1.4.1.171.11.24.1	swDevPackage	DES3225G-MIB
1.3.6.1.4.1.171.11.24.1.2	swDevCtrl	DES3225G-MIB
1.3.6.1.4.1.171.11.24.1.2.1	swDevCtrlStpState	DES3225G-MIB

DES3225G-MIB :: swDevCtrlStpState

swDevCtrlStpState

Module

This MIB depends on