All MIBs › DES-2108-MIB › configSNMPEnable
configSNMPEnable
Module: DES-2108-MIB
OID (symbolic): DES-2108-MIB::configSNMPEnable
OID (numeric): 1.3.6.1.4.1.171.10.61.2.11.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/Disable SNMP function. A (1) enables, a (2) disables.
What is configSNMPEnable?
This enables(1) or disables(2) the SNMP agent on the switch entirely. Disabling it stops all SNMP polling and trap generation, so an admin would normally only do this as a security hardening step when SNMP management is not used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.61.2.11.9 snmpwalk -v2c -c public <target> DES-2108-MIB::configSNMPEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.61.2.11.9.1 snmpget -v2c -c public <target> DES-2108-MIB::configSNMPEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.61.2.11.9.1 i <value>
Start monitoring D-Link DES-2108 8-port smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-2108-MIB::configSNMPEnable OID value, configure state conditions and alerts, and monitor any D-Link DES-2108 8-port smart switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.61 | dlink_DES21XXSeriesProd | DES-2108-MIB |
| 1.3.6.1.4.1.171.10.61.2 | des_2108 | DES-2108-MIB |
| 1.3.6.1.4.1.171.10.61.2.11 | companyConfigGroup | DES-2108-MIB |
| 1.3.6.1.4.1.171.10.61.2.11.9 | configSNMPEnable | DES-2108-MIB |