DES-2108-MIB :: commTrapSNMPBootup

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDES-2108-MIBcommTrapSNMPBootup

commTrapSNMPBootup

Module: DES-2108-MIB

OID (symbolic): DES-2108-MIB::commTrapSNMPBootup

OID (numeric): 1.3.6.1.4.1.171.10.61.2.1.3.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Bootup trap

What is commTrapSNMPBootup?

This enables(1) or disables(2) whether this trap-community entry sends a trap when the switch boots up. Enable it so your NMS is notified whenever the switch has power-cycled or reset, which often signals an unplanned outage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.61.2.1.3.1.5
snmpwalk -v2c -c public <target> DES-2108-MIB::commTrapSNMPBootup

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.61.2.1.3.1.5.1
snmpget -v2c -c public <target> DES-2108-MIB::commTrapSNMPBootup.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.61.2.1.3.1.5.1 i <value>

Start monitoring D-Link DES-2108 8-port smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-2108-MIB::commTrapSNMPBootup OID value, configure state conditions and alerts, and monitor any D-Link DES-2108 8-port smart switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.61dlink_DES21XXSeriesProdDES-2108-MIB
1.3.6.1.4.1.171.10.61.2des_2108DES-2108-MIB
1.3.6.1.4.1.171.10.61.2.1companyCommGroupDES-2108-MIB
1.3.6.1.4.1.171.10.61.2.1.3commTrapTableDES-2108-MIB
1.3.6.1.4.1.171.10.61.2.1.3.1commTrapEntryDES-2108-MIB
1.3.6.1.4.1.171.10.61.2.1.3.1.5commTrapSNMPBootupDES-2108-MIB