All MIBs › DES-1252-MIB › configMirrorTXSrc
configMirrorTXSrc
Module: DES-1252-MIB
OID (symbolic): DES-1252-MIB::configMirrorTXSrc
OID (numeric): 1.3.6.1.4.1.171.10.75.4.11.8.1.3
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: When mirroring is enabled , this identifies the TX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is configMirrorTXSrc?
A bitmap selecting which ports' outbound (transmitted) traffic is copied to the mirror monitor port, with each bit representing one port. An admin enables this on an uplink port to capture everything it sends out for analysis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.75.4.11.8.1.3 snmpwalk -v2c -c public <target> DES-1252-MIB::configMirrorTXSrc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.75.4.11.8.1.3.1 snmpget -v2c -c public <target> DES-1252-MIB::configMirrorTXSrc.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.75.4.11.8.1.3.1 s <value>
Start monitoring D-Link DES-1252 48-port smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-1252-MIB::configMirrorTXSrc OID value, configure state conditions and alerts, and monitor any D-Link DES-1252 48-port smart switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.75 | dlink_FESmartSwitch | DES-1226G-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.75.4 | des_1252a1 | DES-1252-MIB |
| 1.3.6.1.4.1.171.10.75.4.11 | companyConfigGroup | DES-1252-MIB |
| 1.3.6.1.4.1.171.10.75.4.11.8 | configMirrorTable | DES-1252-MIB |
| 1.3.6.1.4.1.171.10.75.4.11.8.1 | configMirrorEntry | DES-1252-MIB |
| 1.3.6.1.4.1.171.10.75.4.11.8.1.3 | configMirrorTXSrc | DES-1252-MIB |