All MIBs › DECNET-PHIV-MIB › phivRouteRoutingType
phivRouteRoutingType
Module: DECNET-PHIV-MIB
OID (symbolic): DECNET-PHIV-MIB::phivRouteRoutingType
OID (numeric): 1.3.6.1.2.1.18.5.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This read-write parameter indicates the type of the executor node. The node-type is one of the following:
routing-III nonrouting-III routing-IV ronrouting-IV area
A routing node has full routing capability. A nonrouting node contains a subset of the Routing routing modules. The III and IV indicate the DNA phase of the node. Nonrouting nodes can deliver and receive packets to and from any node, but cannot route packets from other nodes through to other nodes. An area node routes between areas. Refer to the Routing specification for details.
For adjacent nodes, this is a read-only parameter that indicates the type of the reachable adjacent node. NOTE: The ROUTING-III and NONROUTING-III values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.5.25 snmpwalk -v2c -c public <target> DECNET-PHIV-MIB::phivRouteRoutingType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.5.25.1 snmpget -v2c -c public <target> DECNET-PHIV-MIB::phivRouteRoutingType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.5.25.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.18 | phiv | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.5 | routing | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.5.25 | phivRouteRoutingType | DECNET-PHIV-MIB |