DECHUB900-PTRM-MIB-V3-0 :: ptrmTrunkType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECHUB900-PTRM-MIB-V3-0 › ptrmTrunkType

ptrmTrunkType

Module: DECHUB900-PTRM-MIB-V3-0

OID (symbolic): DECHUB900-PTRM-MIB-V3-0::ptrmTrunkType

OID (numeric): 1.3.6.1.4.1.36.2.18.11.3.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Identifies a trunk (i.e. non-lobe) port. All token ring modules implement all four rows defined by the ptrmTrunkType values. If a module's configuration does not allow it to implement the particular trunk ptrmTrunkOperStatus is notPresent(3). For example, linecards in a hub do not have a RingIn or RingOut port and therefore contain the value notPreset(3) as the ptrmTrunkOperStatus for ringIn(1) and ringOut(2) rows of the trunk table.

Linecards that do not have a fiber interface need not implement rows FiberIn(5) and FiberOut(6). NOTE - If a Trunk is notPresent, the rest of the values in this table are to be ignored.

What is ptrmTrunkType?

Identifies which of the fixed trunk-port rows (RingIn, RingOut, HubA, HubB, FiberIn, FiberOut) this table entry represents; every token ring module implements all rows, but a module lacking a given physical port (e.g. no RingIn/RingOut on a hub linecard, or no fiber interface) reports ptrmTrunkOperStatus as notPresent(3) for that row, meaning the rest of the row's values should be ignored.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.3.2.1.1
snmpwalk -v2c -c public <target> DECHUB900-PTRM-MIB-V3-0::ptrmTrunkType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.3.2.1.1.1
snmpget -v2c -c public <target> DECHUB900-PTRM-MIB-V3-0::ptrmTrunkType.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ptrmTrunkType.1

Start monitoring DEC DEChub900 MultiSwitch chassis (Token Ring PTRM linecards) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-PTRM-MIB-V3-0::ptrmTrunkType OID value, configure state conditions and alerts, and monitor any DEC DEChub900 MultiSwitch chassis (Token Ring PTRM linecards) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decCMU-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18.11decHub900DECHUB900-CHASSIS-MIB-V3-0
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.11.3ptrmDECHUB900-PTRM-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.3.2ptrmTrunkTableDECHUB900-PTRM-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.3.2.1ptrmTrunkEntryDECHUB900-PTRM-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.3.2.1.1ptrmTrunkTypeDECHUB900-PTRM-MIB-V3-0