All MIBs › DECHUB900-HUBMGR-MIB-V3-0 › hubEtherStatsJabbers
hubEtherStatsJabbers
Module: DECHUB900-HUBMGR-MIB-V3-0
OID (symbolic): DECHUB900-HUBMGR-MIB-V3-0::hubEtherStatsJabbers
OID (numeric): 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1.1.12
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
What is hubEtherStatsJabbers?
This counts oversized packets (over 1518 octets) received on this interface that also had a bad FCS, using a threshold-based definition rather than the IEEE time-based jabber definition. Admins watch this for signs of a malfunctioning transceiver or NIC that's transmitting oversized, corrupted frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1.1.12 snmpwalk -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubEtherStatsJabbers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1.1.12.1 snmpget -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubEtherStatsJabbers.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hubEtherStatsJabbers.1
Start monitoring Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-HUBMGR-MIB-V3-0::hubEtherStatsJabbers OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.1 | mgmtAgent | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2 | mgmtAgentVersion2 | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1 | mamPrivate | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2 | rmonHub | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4 | hubStatistics | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1 | hubEtherStatsTable | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1.1 | hubEtherStatsEntry | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.4.1.1.12 | hubEtherStatsJabbers | DECHUB900-HUBMGR-MIB-V3-0 |