DECHUB900-HUBMGR-MIB-V3-0 :: hubEtherCapabilitiesLanType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDECHUB900-HUBMGR-MIB-V3-0hubEtherCapabilitiesLanType

hubEtherCapabilitiesLanType

Module: DECHUB900-HUBMGR-MIB-V3-0

OID (symbolic): DECHUB900-HUBMGR-MIB-V3-0::hubEtherCapabilitiesLanType

OID (numeric): 1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This enumeration describes interface, port, or LAN.

The interface type is for any interface which can be described in the MIB-II interface table. Examples of interfaces include switch ports, SLIP/PPP ports, and repeater MACs.

The portGroup type is for a group of ports which can be described in the IETF repeater MIB (rfc1368).

The portGoup type is for LANs configured to connect the front- bezel ports of repeaters. These internal LANs should be described in the pcomConTable. Indices should match the indices in the pcomConTable.

The port type is for a single port which can be described by the IETF repeater MIB.

What is hubEtherCapabilitiesLanType?

This classifies what kind of Ethernet entity this capabilities row describes: interface(1) for something in the standard MIB-II interface table, portGroup(2) for a group of repeater ports, or port(3) for a single repeater port. Admins use this to interpret whether the row's index refers to a switch/router interface or a repeater port grouping.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1.1.3
snmpwalk -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubEtherCapabilitiesLanType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1.1.3.1
snmpget -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubEtherCapabilitiesLanType.1

Start monitoring Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-HUBMGR-MIB-V3-0::hubEtherCapabilitiesLanType OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18.11decHub900DECHUB900-ERPTR-MIB-V3-0
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.11.1mgmtAgentDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2mgmtAgentVersion2DECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1mamPrivateDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1.2rmonHubDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1.2.3hubEtherCapabilitiesDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1hubEtherCapabilitiesTableDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1.1hubEtherCapabilitiesEntryDECHUB900-HUBMGR-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.1.2.1.2.3.1.1.3hubEtherCapabilitiesLanTypeDECHUB900-HUBMGR-MIB-V3-0