All MIBs › DECHUB900-HUBMGR-MIB-V3-0 › hubAlarmFallingThreshold
hubAlarmFallingThreshold
Module: DECHUB900-HUBMGR-MIB-V3-0
OID (symbolic): DECHUB900-HUBMGR-MIB-V3-0::hubAlarmFallingThreshold
OID (numeric): 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated hubAlarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3).
After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the hubAlarmRisingThreshold.
This object may not be modified if the associated hubAlarmStatus object is equal to valid(1).
What is hubAlarmFallingThreshold?
This is the lower threshold that, when crossed from above on a sample, generates a single falling event for this alarm entry. It works as the counterpart to hubAlarmRisingThreshold, so the alarm won't re-fire on the rising side again until the value has dipped down to or below this falling threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1.9 snmpwalk -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubAlarmFallingThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1.9.1 snmpget -v2c -c public <target> DECHUB900-HUBMGR-MIB-V3-0::hubAlarmFallingThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1.9.1 i <value>
Start monitoring Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-HUBMGR-MIB-V3-0::hubAlarmFallingThreshold OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation (DEC) DEChub 900 multiswitch hub chassis from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.1 | mgmtAgent | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2 | mgmtAgentVersion2 | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1 | mamPrivate | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2 | rmonHub | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1 | hubAlarm | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1 | hubAlarmTable | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1 | hubAlarmEntry | DECHUB900-HUBMGR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.2.1.2.1.1.1.9 | hubAlarmFallingThreshold | DECHUB900-HUBMGR-MIB-V3-0 |