All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrGroupLanTotalOctets
erptrGroupLanTotalOctets
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrGroupLanTotalOctets
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.4
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: This object counts the total number of octets contained in non-collision packets transmitted by all the ports in this group. This counter increments by the same amount for all groups configured to operate in concert as a single repeater unit.
This counter is the aggregate of traffic received from all external and internal ports in this group, including unmanaged internal ports which do not appear in this group's port table. This object may report a different value than the rptrMonitorGroupTotalOctets counter defined in the IETF repeater MIB [6], which is defined as the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports appearing in this group's port table.
This statistic provides an indication of the total data transferred. The minimum rollover time of this counter is approximately 58 minutes.
What is erptrGroupLanTotalOctets?
This counter tracks total octets in non-collision packets transmitted by all ports in the group, including internal/unmanaged ports not listed in the port table, so it can differ from the standard rptrMonitorGroupTotalOctets figure. It gives a rough measure of total traffic volume on the group and rolls over roughly every 58 minutes on a busy segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.4 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrGroupLanTotalOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.4.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrGroupLanTotalOctets.1
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrGroupLanTotalOctets OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1 | erptrBasicPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2 | erptrGroupInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1 | erptrGroupTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1 | erptrGroupEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.1.2.1.1.4 | erptrGroupLanTotalOctets | DECHUB900-ERPTR-MIB-V3-0 |