All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrDprSecondaryPortIndex
erptrDprSecondaryPortIndex
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryPortIndex
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object identifies the master redundant port (within the group) on the secondary segment of the redundant link associated with this entry.
This secondary redundant port acts in concert with the primary redundant port specified in erptrDprLinkGroupIndex and erptrDprLinkPortIndex to provide a fault-tolerant dual-redundant link when erptrDprLinkType is set to redundantMaster(1). The value of this object is irrelevant when erptrDprLinkType is set to any other value.
When erptrDprLinkType is set to redundantMaster(1), the value of this object must be between 1 and rptrPortCapacity for this group for redundancy to be operational.
Note: Once this table entry has been validated (i.e. erptrDprLinkEntryStatus is set to valid(1)), the agent does not allow this object to be set to any value other than the present setting. Any attempt to do otherwise results in a badValue error.
Note: The state of this object is preserved when the repeater undergoes a power-up reset if the value of this entry's erptrDprLinkEntryStatus is set to valid(1).
What is erptrDprSecondaryPortIndex?
For a redundantMaster link, this names the specific port within erptrDprSecondaryGroupIndex's group that serves as the secondary master port of the redundant pair; it must be a valid port number for redundancy to be operational, and it's irrelevant for other link types. It locks once the entry's status is set to valid(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryPortIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryPortIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7.1 i <value>
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryPortIndex OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3 | erptrDprPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3 | erptrDprPortInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1 | erptrDprLinkTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1 | erptrDprLinkEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.7 | erptrDprSecondaryPortIndex | DECHUB900-ERPTR-MIB-V3-0 |