All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrDprSecondaryGroupIndex
erptrDprSecondaryGroupIndex
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryGroupIndex
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object identifies the group containing the master redundant port on the secondary segment of the redundant link associated with this entry.
This secondary redundant port acts in concert with the primary redundant port specified in erptrDprLinkGroupIndex and erptrDprLinkPortIndex to provide a fault-tolerant dual-redundant link when erptrDprLinkType is set to redundantMaster(1). The value of this object is irrelevant when erptrDprLinkType is set to any other value.
When erptrDprLinkType is set to redundantMaster(1), the value of this object must be between 1 and rptrGroupCapacity for redundancy to be operational.
Note: Once this table entry has been validated (i.e. erptrDprLinkEntryStatus is set to valid(1)), the agent does not allow this object to be set to any value other than the present setting. Any attempt to do otherwise results in a badValue error.
Note: The state of this object is preserved when the repeater undergoes a power-up reset if the value of this entry's erptrDprLinkEntryStatus is set to valid(1).
What is erptrDprSecondaryGroupIndex?
For a redundantMaster link, this names the port-group holding the secondary (standby-side) master port that pairs with the primary port to form the fault-tolerant link; it's ignored for other link types and must be a valid group number between 1 and rptrGroupCapacity for redundancy to actually work. Like the link type, it locks once the entry is validated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryGroupIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryGroupIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6.1 i <value>
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrDprSecondaryGroupIndex OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3 | erptrDprPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3 | erptrDprPortInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1 | erptrDprLinkTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1 | erptrDprLinkEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.6 | erptrDprSecondaryGroupIndex | DECHUB900-ERPTR-MIB-V3-0 |