All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrDprLinkOperStatus
erptrDprLinkOperStatus
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkOperStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object reports the operational status of either the redundant master primary port or the redundant responder port associated with this entry (as specified by erptrDprLinkType).
A value of redundancyNotOperational(1) indicates that redundancy is not operational on the link associated with this entry.
A value of masterPrimaryActive(2) indicates: - redundancy is operational on the link associated with this entry. - the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex is configured as a master port on the primary segment of the redundant link associated with this entry. - the primary segment of the dual-redundant link is currently the active link. - No link failures are currently detected on the primary link.
A value of masterPrimaryStandby(3) indicates: - redundancy is operational on the link associated with this entry. - the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex is configured as a master port on the primary segment of the redundant link associated with this entry. - the primary segment of the dual-redundant link is currently the standby link. - No link failures are currently detected on the primary link.
A value of masterPrimaryLinkFailure(4) indicates: - redundancy is operational on the link associated with this entry. - the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex is configured as a master port on the primary segment of the redundant link associated with this entry. - a link failure condition exists on the primary segment of the dual-redundant link (which may have caused a fail-over to the secondary link).
A value of responderOk(5) indicates: - redundancy is operational on the link associated with this entry. - the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex is configured as a redundant responder port which may be connected to either the primary or the secondary segment of the redundant link associated with this entry. - the redundant responder port has not detected any link failures on the segment to which it is connected.
A value of responderLinkFailure(6) indicates: - redundancy is operational on the link associated with this entry. - the port specified by erptrDprLinkGroupIndex and erptrDprLinkPortIndex is configured as a redundant responder port which may be connected to either the primary or the secondary segment of the redundant link associated with this entry. - the redundant responder port has detected a link failure on the segment to which it is connected.
What is erptrDprLinkOperStatus?
This reports the live state of the redundant link's master-primary or responder port: masterPrimaryActive(2)/Standby(3) show which side is currently carrying traffic, masterPrimaryLinkFailure(4) flags a fault that may have triggered failover, and responderOk(5)/responderLinkFailure(6) cover the responder end. Check this after a failover event to confirm the standby side actually took over cleanly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.5 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.5.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkOperStatus.1
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkOperStatus OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3 | erptrDprPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3 | erptrDprPortInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1 | erptrDprLinkTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1 | erptrDprLinkEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.5 | erptrDprLinkOperStatus | DECHUB900-ERPTR-MIB-V3-0 |