All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrDprLinkEntryStatus
erptrDprLinkEntryStatus
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkEntryStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of this table entry.
Setting this object to createRequest(2) adds a new entry in this table. Immediately after completing the create operation, the agent sets this object to underCreation(3). An existing instance of this object cannot be set to createRequest(2).
Entries exist in the underCreation(3) state until the management station sets this object to valid(1) or aborts, setting this object to invalid(4).
The repeater does not use the information in this entry to enforce redundancy unless this object is set to valid (1).
Setting this object to invalid(4) has the effect of deleting this entry from the table.
Note: The state of this object is preserved when the repeater undergoes a power-up reset if the value of this entry's erptrDprLinkEntryStatus is set to valid(1).
What is erptrDprLinkEntryStatus?
This is the standard row-creation state machine for a dual-redundant-link entry: set to createRequest(2) to start adding a row (the agent then reports underCreation(3)), then set to valid(1) to activate it or invalid(4) to abort or delete it. The repeater doesn't actually enforce redundancy on this entry until it's set to valid(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkEntryStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkEntryStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11.1 i <value>
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrDprLinkEntryStatus OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3 | erptrDprPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3 | erptrDprPortInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1 | erptrDprLinkTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1 | erptrDprLinkEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.3.3.1.1.11 | erptrDprLinkEntryStatus | DECHUB900-ERPTR-MIB-V3-0 |