All MIBs › DECHUB900-ERPTR-MIB-V3-0 › erptrAddrLearnPortCtrlOperStatus
erptrAddrLearnPortCtrlOperStatus
Module: DECHUB900-ERPTR-MIB-V3-0
OID (symbolic): DECHUB900-ERPTR-MIB-V3-0::erptrAddrLearnPortCtrlOperStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A value of learningEnabledAndActive(1) indicates that the agent is actively learning MAC source addresses from readable frames received on this port and recording them in erptrAddrLearnAddrTable. It implies that erptrAddrLearnPortCtrlAdminStatus had previously been set to enableLearning(2) and the port has not yet learned and saved the maximum allowable number of distinct addresses (as specified by erptrAddrLearnPortCtrlCapacity).
A value of learningEnabledAndStopped(2) indicates that the agent is NOT currently actively learning MAC source addresses from readable frames received on this port. It implies that erptrAddrLearnPortCtrlAdminStatus had previously been set to enableLearning(2) but the port has learned and saved the maximum allowable number of distinct addresses (as specified by erptrAddrLearnPortCtrlCapacity).
A value of learningDisabled(3) indicates that the agent is NOT actively learning distinct MAC source addresses from readable frames received on this port. It implies that erptrAddrLearnPortCtrlAdminStatus had previously been set to disableLearning(3).
What is erptrAddrLearnPortCtrlOperStatus?
This reports the live state of address learning on the port: learningEnabledAndActive(1) means it's still recording new addresses, learningEnabledAndStopped(2) means it hit its capacity limit and stopped, and learningDisabled(3) means learning was turned off via the admin-status object. Check this to see whether a port has room left to learn more device addresses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.5 snmpwalk -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrAddrLearnPortCtrlOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.5.1 snmpget -v2c -c public <target> DECHUB900-ERPTR-MIB-V3-0::erptrAddrLearnPortCtrlOperStatus.1
Start monitoring DEC HUB 900 series modular hub/repeater chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-ERPTR-MIB-V3-0::erptrAddrLearnPortCtrlOperStatus OID value, configure state conditions and alerts, and monitor any DEC HUB 900 series modular hub/repeater chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5 | repeater | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1 | rptrVersion1 | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1 | rptrExtensions | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6 | erptrAddrLearnPackage | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3 | erptrAddrLearnPortInfo | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1 | erptrAddrLearnPortCtrlTable | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1 | erptrAddrLearnPortCtrlEntry | DECHUB900-ERPTR-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.5.1.1.6.3.1.1.5 | erptrAddrLearnPortCtrlOperStatus | DECHUB900-ERPTR-MIB-V3-0 |