DECHUB900-COMMON-MIB-V3-0 :: pcomLoadTftpDirection

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECHUB900-COMMON-MIB-V3-0 › pcomLoadTftpDirection

pcomLoadTftpDirection

Module: DECHUB900-COMMON-MIB-V3-0

OID (symbolic): DECHUB900-COMMON-MIB-V3-0::pcomLoadTftpDirection

OID (numeric): 1.3.6.1.4.1.36.2.18.11.2.4.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This device-specific object represents the TFTP capability of the device, in relation to its Management Agent Module (MAM). The TFTP protocol allows initiation of new program downloads to begin with either a TFTP READ packet, or a TFTP WRITE packet. This object is set to pcomLoadTftpDirectionStartRead to indicate that the device expects a TFTP READ packet to begin a new program download procedure. The object is set to pcomLoadTftpDirectionAckWrite, to indicate that the device expects a TFTP WRITE packet to begin a new program download procedure.

If an (older) device returns a 'no such object' error code, then the value of pcomLoadTftpDirectionAckWrite will be assumed by the requestor.

This object is non-volatile.

What is pcomLoadTftpDirection?

Indicates whether the device expects to initiate a firmware load with a TFTP READ or TFTP WRITE packet, letting the loading agent know which direction to drive the transfer. Older devices that don't support this object are assumed to use the AckWrite behavior by default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.2.4.6
snmpwalk -v2c -c public <target> DECHUB900-COMMON-MIB-V3-0::pcomLoadTftpDirection

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.2.4.6.1
snmpget -v2c -c public <target> DECHUB900-COMMON-MIB-V3-0::pcomLoadTftpDirection.1

Start monitoring DEC/Compaq DEChub 900 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-COMMON-MIB-V3-0::pcomLoadTftpDirection OID value, configure state conditions and alerts, and monitor any DEC/Compaq DEChub 900 modular hub chassis from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decCMU-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18.11decHub900DECHUB900-CHASSIS-MIB-V3-0
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.11.2pubCommonDECHUB900-COMMON-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.2.4pcomLoadDECHUB900-COMMON-MIB-V3-0
1.3.6.1.4.1.36.2.18.11.2.4.6pcomLoadTftpDirectionDECHUB900-COMMON-MIB-V3-0