All MIBs › DECHUB900-COMMON-MIB-V3-0 › pcomLoadAdminStatus
pcomLoadAdminStatus
Module: DECHUB900-COMMON-MIB-V3-0
OID (symbolic): DECHUB900-COMMON-MIB-V3-0::pcomLoadAdminStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.11.2.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to control the program load process of a device. When read, the value other(1) is returned.
When set to start-read(2) the device initiates a TFTP read operation to read a new program image. When set to start-write(3) the device is placed in such a state as to accept a new program image via a TFTP write operation.
Once initiated, the status of the load attempt is reflected in pcomLoadOperStatus.
A device shall always reset upon completion of a successful load attempt. It may reset upon unsuccessful completion of the load attempt.
When set to cancel(4) the device will attempt to cancel an ongoing load.
What is pcomLoadAdminStatus?
Starts or cancels a firmware load: writing start-read(2) triggers a TFTP read of a new firmware image, start-write(3) arms the device to accept an incoming TFTP write, and cancel(4) aborts an in-progress load. Reading it always returns other(1); an admin tracks the actual outcome via pcomLoadOperStatus instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.2.4.1 snmpwalk -v2c -c public <target> DECHUB900-COMMON-MIB-V3-0::pcomLoadAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.2.4.1.1 snmpget -v2c -c public <target> DECHUB900-COMMON-MIB-V3-0::pcomLoadAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.2.4.1.1 i <value>
Start monitoring DEC/Compaq DEChub 900 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-COMMON-MIB-V3-0::pcomLoadAdminStatus OID value, configure state conditions and alerts, and monitor any DEC/Compaq DEChub 900 modular hub chassis from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-CHASSIS-MIB-V3-0 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.2 | pubCommon | DECHUB900-COMMON-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.2.4 | pcomLoad | DECHUB900-COMMON-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.2.4.1 | pcomLoadAdminStatus | DECHUB900-COMMON-MIB-V3-0 |