All MIBs › DECHUB90-MIB › dh90SlotReset
dh90SlotReset
Module: DECHUB90-MIB
OID (symbolic): DECHUB90-MIB::dh90SlotReset
OID (numeric): 1.3.6.1.4.1.36.2.18.10.1.5.1.21
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A control variable to perform reset functions on DEChub 90 modules which are in the same hub as the managing agent. The agent must be the hub master (see da90BackplaneState) for reset functions to be performed.
In response to a Get or getNext request, the agent returns the value ready(1). Setting this value to reset(2) causes the entire module to be reset. Setting this value to resetToFactory(3) causes the entire device to be reset to the original factory settings. For repeaters, all port names are cleared and all drpt90PortAdminStatus values are set to enabled(1). For both reset functions, the port address database is cleared.
Note that this object performs the same reset functions as ds90LMaintenance for terminal servers, dbSysInitSwitch for bridges and da90Maintenance for the managing agent.
What is dh90SlotReset?
A control object that always reads back ready(1); writing reset(2) reboots the module in this slot, and resetToFactory(3) restores it to factory defaults, clearing port names and the port address database.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.10.1.5.1.21 snmpwalk -v2c -c public <target> DECHUB90-MIB::dh90SlotReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.10.1.5.1.21.1 snmpget -v2c -c public <target> DECHUB90-MIB::dh90SlotReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.10.1.5.1.21.1 i <value>
Start monitoring Digital Equipment Corporation DEChub 90 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB90-MIB::dh90SlotReset OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation DEChub 90 modular hub chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.10 | dechub90 | DECHUB90-MIB |
| 1.3.6.1.4.1.36.2.18.10.1 | dh90 | DECHUB90-MIB |
| 1.3.6.1.4.1.36.2.18.10.1.5 | dh90SlotTable | DECHUB90-MIB |
| 1.3.6.1.4.1.36.2.18.10.1.5.1 | dh90SlotEntry | DECHUB90-MIB |
| 1.3.6.1.4.1.36.2.18.10.1.5.1.21 | dh90SlotReset | DECHUB90-MIB |