DECHUB90-MIB :: da90Maintenance

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECHUB90-MIB › da90Maintenance

da90Maintenance

Module: DECHUB90-MIB

OID (symbolic): DECHUB90-MIB::da90Maintenance

OID (numeric): 1.3.6.1.4.1.36.2.18.10.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A control variable to perform reset functions on a DECagent 90. In response to a Get or a getNext request, the agent returns ready(1) if SNMP sets are enabled, or setsDisabled(2) if they are disabled. Setting this value to setsDisabled(2) causes SNMP sets to be disabled. Note, however, that you cannot re-enable SNMP sets via this mechanism. SNMP sets can only be re-enabled via the console interface, or by restoring factory settings. Setting this value to reset(3) causes the entire module to be reset. Setting this value to resetToFactory(4) causes the entire device to be reset to the original factory settings. Setting either reset(3) and resetToFactory(4) results in an immediate reset with no response PDU being issued.

What is da90Maintenance?

Control object for resetting the agent itself: reading returns ready(1) if SNMP sets are enabled or setsDisabled(2) if they've been turned off; writing setsDisabled(2) disables sets with no SNMP way back (only console access or a factory reset re-enables them), while reset(3)/resetToFactory(4) reboot the agent immediately with no response PDU.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.10.2.2
snmpwalk -v2c -c public <target> DECHUB90-MIB::da90Maintenance

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.10.2.2.1
snmpget -v2c -c public <target> DECHUB90-MIB::da90Maintenance.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.10.2.2.1 i <value>

Start monitoring Digital Equipment Corporation DEChub 90 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB90-MIB::da90Maintenance OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation DEChub 90 modular hub chassis from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.36decCMU-MIB
1.3.6.1.4.1.36.2emaDEC-ATM-CHASSIS-MIB
1.3.6.1.4.1.36.2.18decMIBextensionDEC-ATM-CHASSIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.36.2.18.10dechub90DECHUB90-MIB
1.3.6.1.4.1.36.2.18.10.2da90DECHUB90-MIB
1.3.6.1.4.1.36.2.18.10.2.2da90MaintenanceDECHUB90-MIB