All MIBs › DEC-ElanConc › ebrMultiPortStatus
ebrMultiPortStatus
Module: DEC-ElanConc
OID (symbolic): DEC-ElanConc::ebrMultiPortStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of this entry. The meanings of the values are:
portMask(1) : The static filtering for this address is specified by the MultiPortAllowedToGoTo field.
lockDown(2) : The static filtering for this address is specified as 'locked-down' to the port specified by the ebrMultiPortPortNum field. This address will be allowed to source frames only from the specified port, and frames destined to this address will be sent out only on the specified port.
maskAndLock(3) : The static filtering for this address is specified by both the ebrMultiPortAllowedToGoTo as well as 'locked-down' as explained above for 'lockDown(2)'.
hello(4) : This is the address used by the bridge in the destination field of Spanning Tree Hellos. It is not a writeable value.
filter(5) : This address will be filtered on all ports.
invalid(6) : Writing this value to the object removes the corresponding entry.
What is ebrMultiPortStatus?
Controls how this multi-port entry is enforced: portMask uses the AllowedToGoTo bitmap, lockDown pins the address to one port, maskAndLock combines both, filter blocks the address everywhere, and writing invalid(6) deletes the entry. hello(4) is reserved for the bridge's own Spanning Tree address and is not writable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5 snmpwalk -v2c -c public <target> DEC-ElanConc::ebrMultiPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5.1 snmpget -v2c -c public <target> DEC-ElanConc::ebrMultiPortStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5.1 i <value>
Start monitoring DEC FDDI networking devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEC-ElanConc::ebrMultiPortStatus OID value, configure state conditions and alerts, and monitor any DEC FDDI networking devices from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.1 | elanext | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4 | ebridge | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7 | ebrMultiPortStatic | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7.1 | ebrMultiPortStaticTable | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7.1.1 | ebrMultiPortStaticEntry | DEC-ELAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5 | ebrMultiPortStatus | DEC-ElanConc |