All MIBs › DEC-ELAN-MIB › ebrMultiPortStatus
ebrMultiPortStatus
Module: DEC-ELAN-MIB
OID (symbolic): DEC-ELAN-MIB::ebrMultiPortStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of this entry. The meanings of the values are:
portMask(1) : The static filtering for this address is specified by the MultiPortAllowedToGoTo field.
lockDown(2) : The static filtering for this address is specified as 'locked-down' to the port specified by the ebrMultiPortPortNum field. This address will be allowed to source frames only from the specified port, and frames destined to this address will be sent out only on the specified port.
maskAndLock(3) : The static filtering for this address is specified by both the ebrMultiPortAllowedToGoTo as well as 'locked-down' as explained above for 'lockDown(2)'.
hello(4) : This is the address used by the bridge in the destination field of Spanning Tree Hellos. It is not a writeable value.
filter(5) : This address will be filtered on all ports.
invalid(6) : Writing this value to the object removes the corresponding entry.
rateLimit(7) : Frames with this address in the destination field will be rate-limited by the bridge, if it supports rate limiting. Applicable only to multicast addresses. For more detail, please see the ebrRateLimiting group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5 snmpwalk -v2c -c public <target> DEC-ELAN-MIB::ebrMultiPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5.1 snmpget -v2c -c public <target> DEC-ELAN-MIB::ebrMultiPortStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5.1 i <value>
Start monitoring DEC/Digital ATM switch/router (legacy, LAN Emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEC-ELAN-MIB::ebrMultiPortStatus OID value, configure state conditions and alerts, and monitor any DEC/Digital ATM switch/router (legacy, LAN Emulation) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.1 | elanext | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4 | ebridge | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7 | ebrMultiPortStatic | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7.1 | ebrMultiPortStaticTable | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7.1.1 | ebrMultiPortStaticEntry | DEC-ELAN-MIB |
| 1.3.6.1.4.1.36.2.18.1.4.7.1.1.5 | ebrMultiPortStatus | DEC-ELAN-MIB |