DC-BGP-MIB :: bgpTrapData

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DC-BGP-MIB › bgpTrapData

bgpTrapData

Module: DC-BGP-MIB

OID (symbolic): DC-BGP-MIB::bgpTrapData

OID (numeric): 1.2.826.0.1.1578918.5.65.1.1.0.1

Node type: NOTIFICATION-TYPE

Description: Structure used to send trap data to the MIB Manager. DC-BGP will send a trap in the following circumstances:

- When a BGP peer's FSM enters the established state, if bgpPeerTrapEstab is set to 'true' for the peer - When a BGP peer's FSM moves from a higher numbered state to a lower numbered state, if bgpPeerTrapBackw is set to 'true' for the peer - When the local device changes Graceful Restart helper state for a peer, if bgpPeerTrapGrHelperState is set to 'true' for the peer - When the maximum numbers of prefixes is reached for an AFI/SAFI for a peer, if bgpPeerTrapPrefix is set to 'true' for the peer and bgpPeerAfiSafiTrapPrefix is set to 'true' for the AFI/SAFI - When the prefix threshold is breached for an AFI/SAFI for a peer, if bgpPeerTrapPrefix is set to 'true' for the peer and bgpPeerAfiSafiTrapPrefix is set to 'true' for the AFI/SAFI.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' DC-BGP-MIB::bgpTrapData
snmptrap -v2c -c public <manager> '' 1.2.826.0.1.1578918.5.65.1.1.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:54440->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (43903656) 5 days, 1:57:16.56
  SNMPv2-MIB::snmpTrapOID.0 = OID: DC-BGP-MIB::bgpTrapData

Start monitoring Router/switch running Data Connection (DC) routing protocol software stack (BGP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DC-BGP-MIB::bgpTrapData OID value, configure state conditions and alerts, and monitor any Router/switch running Data Connection (DC) routing protocol software stack (BGP) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.2member_bodyIEEE802dot11-MIB
1.2.826gbMETASWITCH-MIB
1.2.826.0gbNationalMETASWITCH-MIB
1.2.826.0.1gbNatCompanyMETASWITCH-MIB
1.2.826.0.1.1578918dataConnectionMETASWITCH-MIB
Numeric OIDNameModule
1.2.826.0.1.1578918.5.65.1bgpMibDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.1bgpNotificationsDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.1.0bgpBaseNotificationsDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.1.0.1bgpTrapDataDC-BGP-MIB