DC-BGP-MIB :: bgpPeerHoldTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DC-BGP-MIB › bgpPeerHoldTime

bgpPeerHoldTime

Module: DC-BGP-MIB

OID (symbolic): DC-BGP-MIB::bgpPeerHoldTime

OID (numeric): 1.2.826.0.1.1578918.5.65.1.3.1.1.1.31

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Time interval in seconds for the Hold Timer established with the peer. The value of this is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigd and the Hold Time received in the OPEN message. This value must be at least three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of bgpPeerHoldTimeConfigd is zero (0). It is equivalent to the bgpM2PeerNegotiatedTimersTable entry bgpM2PeerHoldTime.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.2.826.0.1.1578918.5.65.1.3.1.1.1.31
snmpwalk -v2c -c public <target> DC-BGP-MIB::bgpPeerHoldTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.2.826.0.1.1578918.5.65.1.3.1.1.1.31.1
snmpget -v2c -c public <target> DC-BGP-MIB::bgpPeerHoldTime.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bgpPeerHoldTime.1

Start monitoring Router/switch running Data Connection (DC) routing protocol software stack (BGP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DC-BGP-MIB::bgpPeerHoldTime OID value, configure state conditions and alerts, and monitor any Router/switch running Data Connection (DC) routing protocol software stack (BGP) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.2member_bodyIEEE802dot11-MIB
1.2.826gbMETASWITCH-MIB
1.2.826.0gbNationalMETASWITCH-MIB
1.2.826.0.1gbNatCompanyMETASWITCH-MIB
1.2.826.0.1.1578918dataConnectionMETASWITCH-MIB
Numeric OIDNameModule
1.2.826.0.1.1578918.5.65.1bgpMibDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.3bgpPeerDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.3.1bgpPeerDataDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.3.1.1bgpPeerTableDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.3.1.1.1bgpPeerEntryDC-BGP-MIB
1.2.826.0.1.1578918.5.65.1.3.1.1.1.31bgpPeerHoldTimeDC-BGP-MIB