All MIBs › DC-BGP-MIB › bgpAdjRibOutLocalAggrType
bgpAdjRibOutLocalAggrType
Module: DC-BGP-MIB
OID (symbolic): DC-BGP-MIB::bgpAdjRibOutLocalAggrType
OID (numeric): 1.2.826.0.1.1578918.5.65.1.4.4.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates any aggregation processing that has been applied to this Adj-RIB-Out route.
A value of noAggregation(1) indicates that this route does not aggregate any other routes, and is not aggregated by any route.
A value of aggregateRoute(2) indicates that this route is a locally configured aggregating route, corresponding to an entry in the bgpAggregateTable.
A value of unsuppAggregatedRoute(3) indicates that this route has been aggregated by a locally configured aggregate route and is not suppressed - the route is still explicitly advertised to the peer.
A value of suppressedAggregatedRoute(4) indicates that this route has been aggregated by a locally configured aggregate route and is flagged such that it should not be advertised along with the aggregate route. Typically such routes are not installed on an Adj-RIB-Out. If however the aggregate route itself is not permitted to be added to the Adj-RIB-Out then suppressed routes are advertised if they themselves are permitted by policy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.826.0.1.1578918.5.65.1.4.4.1.8 snmpwalk -v2c -c public <target> DC-BGP-MIB::bgpAdjRibOutLocalAggrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.826.0.1.1578918.5.65.1.4.4.1.8.1 snmpget -v2c -c public <target> DC-BGP-MIB::bgpAdjRibOutLocalAggrType.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bgpAdjRibOutLocalAggrType.1
Start monitoring Router/switch running Data Connection (DC) routing protocol software stack (BGP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DC-BGP-MIB::bgpAdjRibOutLocalAggrType OID value, configure state conditions and alerts, and monitor any Router/switch running Data Connection (DC) routing protocol software stack (BGP) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.826 | gb | METASWITCH-MIB |
| 1.2.826.0 | gbNational | METASWITCH-MIB |
| 1.2.826.0.1 | gbNatCompany | METASWITCH-MIB |
| 1.2.826.0.1.1578918 | dataConnection | METASWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.826.0.1.1578918.5.65.1 | bgpMib | DC-BGP-MIB |
| 1.2.826.0.1.1578918.5.65.1.4 | bgpRib | DC-BGP-MIB |
| 1.2.826.0.1.1578918.5.65.1.4.4 | bgpAdjRibOutTable | DC-BGP-MIB |
| 1.2.826.0.1.1578918.5.65.1.4.4.1 | bgpAdjRibOutEntry | DC-BGP-MIB |
| 1.2.826.0.1.1578918.5.65.1.4.4.1.8 | bgpAdjRibOutLocalAggrType | DC-BGP-MIB |