All MIBs › DANTHERM-COOLING-MIB › alarm1mask
alarm1mask
Module: DANTHERM-COOLING-MIB
OID (symbolic): DANTHERM-COOLING-MIB::alarm1mask
OID (numeric): 1.3.6.1.4.1.46651.1.12.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Alarm drive 1 Mask [Can have multiple Alarm Errors]. Bit Position - Value - Alarm Drive State: 0 - Unselect, 1 - Select 1 - 1 - Voltage Low 2 - 2 - Voltage High 3 - 4 - Tempr Low 4 - 8 - Tempr Limit 1 5 - 16 - Tempr Limit 2 6 - 32 - Tempr Limit 3 7 - 64 - Humid. Low 8 - 128 - Humid. High 9 - 256 - Fltr Pressure 1 10 - 512 - Fltr Pressure 2 11 - 1024 - Fan 1 12 - 2048 - Fan 2 13 - 4096 - Onboard Sens 14 - 8192 - Room Sens 15 - 16384 - Hotspot Sens 16 - 32768 - Ambient 1 Sens 17 - 65536 - Ambient 2 Sens 18 - 131072 - Dig 1 I/P 19 - 262144 - Dig 2 I/P 20 - 524288 - Dig 3 I/P 21 - 1048576 - Filter I/P 1 22 - 2097152 - Filter I/P 2 23 - 4194304 - Network 24 - 8388608 - Int storage 25 - 16777216 - SD Card
What is alarm1mask?
Bit mask choosing which conditions drive alarm output 1; several can be combined by adding their values (0 selects none). Values are powers of two from 1 (voltage low) up to 16777216 (SD card), covering voltage low, voltage high, temperature low, temperature limits 1 to 3, humidity low, humidity high, filter pressure 1 and 2, fan 1 and 2, the five temperature sensors, digital inputs 1 to 3, filter inputs 1 and 2, network, internal storage and SD card. For example 12 would select temperature low and temperature limit 1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.46651.1.12.2 snmpwalk -v2c -c public <target> DANTHERM-COOLING-MIB::alarm1mask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.46651.1.12.2.1 snmpget -v2c -c public <target> DANTHERM-COOLING-MIB::alarm1mask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.46651.1.12.2.1 i <value>
Start monitoring Dantherm CC3000 precision cooling/HVAC controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DANTHERM-COOLING-MIB::alarm1mask OID value, configure state conditions and alerts, and monitor any Dantherm CC3000 precision cooling/HVAC controller from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.46651 | danthermCooling | DANTHERM-COOLING-MIB |
| 1.3.6.1.4.1.46651.1 | controllerCC3000 | DANTHERM-COOLING-MIB |
| 1.3.6.1.4.1.46651.1.12 | alarmConfig | DANTHERM-COOLING-MIB |
| 1.3.6.1.4.1.46651.1.12.2 | alarm1mask | DANTHERM-COOLING-MIB |