All MIBs › CXPhysicalInterfaceManager-MIB › cxPhyIfType
cxPhyIfType
Module: CXPhysicalInterfaceManager-MIB
OID (symbolic): CXPhysicalInterfaceManager-MIB::cxPhyIfType
OID (numeric): 1.3.6.1.4.1.495.2.1.5.16.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Identifies the physical interface type of the port.
Options:
others (1)
v24 (2)
v35 (3)
x21 (4)
v34 (5)
u-isdn-bri (6)
u-isdn-pri (7)
st-isdn-bri (8)
st-isdn-pri (9)
dds-56k (10)
dds-t1e1 (11)
fxs-voice (12)
fxo-voice (13)
em-voice (14)
ethernet (15)
token-ring (16)
v35-eu (17)
HSIO (18)
USIO (19)
LANIO (20)
ELIO (21)
VOXIO (22)
TLIO (23)
T1E1IO (24)
DVC (25)
multi-io (26)
fast-ethernet (27)
atm-cell-io (28) The speed that this card can handle is T1/E1 up to T3/E3.
Default Value: none
What is cxPhyIfType?
This value reports the physical interface type of a given port, chosen from a long vendor-defined list covering serial standards, ISDN variants, voice interfaces, Ethernet and Token Ring, and several proprietary I/O module types specific to this chassis family. Administrators use this to determine what kind of physical connectivity a given port actually provides before assigning cabling or configuring protocol-specific settings. For example, a port reporting type ethernet(15) would be a standard Ethernet port, while one reporting fxs-voice(12) would be an analog voice port expecting a phone or PBX trunk connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.5.16.3.1.2 snmpwalk -v2c -c public <target> CXPhysicalInterfaceManager-MIB::cxPhyIfType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.5.16.3.1.2.1 snmpget -v2c -c public <target> CXPhysicalInterfaceManager-MIB::cxPhyIfType.1
Start monitoring Memotec CX-series WAN access/multiplexer device (physical interface inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXPhysicalInterfaceManager-MIB::cxPhyIfType OID value, configure state conditions and alerts, and monitor any Memotec CX-series WAN access/multiplexer device (physical interface inventory) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.5 | cxSystem | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.5.16 | cxPortManager | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.5.16.3 | cxPhyIfTable | CXPhysicalInterfaceManager-MIB |
| 1.3.6.1.4.1.495.2.1.5.16.3.1 | cxPhyIfEntry | CXPhysicalInterfaceManager-MIB |
| 1.3.6.1.4.1.495.2.1.5.16.3.1.2 | cxPhyIfType | CXPhysicalInterfaceManager-MIB |