CXFLT-IP-MIB :: cxFltIpRowStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXFLT-IP-MIB › cxFltIpRowStatus

cxFltIpRowStatus

Module: CXFLT-IP-MIB

OID (symbolic): CXFLT-IP-MIB::cxFltIpRowStatus

OID (numeric): 1.3.6.1.4.1.495.2.1.6.21.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Allows you to control the status of the table entries. If you change this value to 1 (invalid), the corresponding table entry will be deleted when you restart and save the configuration by issuing the command 'sysmgt restart=1'.

Options: invalid (1): Row is flagged. After next reset the values will be disabled and the row will be deleted from the table.

valid (2): Values are enabled.

Default Value: (2)

Configuration changed: Administrative

What is cxFltIpRowStatus?

This enumerated value (invalid or valid) controls whether a row in the filter/forward table is active. Setting it to invalid(1) flags the entry so that, after the device is restarted with the 'sysmgt restart=1' command, the row's values are disabled and it is removed from the table. For example, an admin decommissioning a filter rule would set this to invalid before the next restart to have the entry purged.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.7
snmpwalk -v2c -c public <target> CXFLT-IP-MIB::cxFltIpRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.7.1
snmpget -v2c -c public <target> CXFLT-IP-MIB::cxFltIpRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.7.1 i <value>

Start monitoring CX/Memotec routing/switching equipment (IP frame filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFLT-IP-MIB::cxFltIpRowStatus OID value, configure state conditions and alerts, and monitor any CX/Memotec routing/switching equipment (IP frame filtering) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.21cxFltIpCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.21.1cxFltIpAddrTableCXFLT-IP-MIB
1.3.6.1.4.1.495.2.1.6.21.1.1cxFltIpAddrEntryCXFLT-IP-MIB
1.3.6.1.4.1.495.2.1.6.21.1.1.7cxFltIpRowStatusCXFLT-IP-MIB