All MIBs › CXFLT-IP-MIB › cxFltIpParameter
cxFltIpParameter
Module: CXFLT-IP-MIB
OID (symbolic): CXFLT-IP-MIB::cxFltIpParameter
OID (numeric): 1.3.6.1.4.1.495.2.1.6.21.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Identifies the parameter which provides filtering/forwarding action and priority processing for each address in the FF table.
Options: discard(1): Do not forward the data.
forward(2): Forward the data.
priority-low(3): Forward with a low priority (Frame Relay only.)
priority-high(4): Forward with a high priority (Frame Relay only.)
Default Value: discard (1)
Configuration Changed: Administrative
What is cxFltIpParameter?
This enumerated value defines what action the device takes for traffic matching the source/destination pair in this table row: discard, forward, or forward with low or high priority (the priority options apply to Frame Relay only). It lets an administrator turn each filter entry into either a block rule or a prioritized forwarding rule. For example, setting this to forward(2) allows traffic between the configured source and destination through, while discard(1) - the default - blocks it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.6 snmpwalk -v2c -c public <target> CXFLT-IP-MIB::cxFltIpParameter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.6.1 snmpget -v2c -c public <target> CXFLT-IP-MIB::cxFltIpParameter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.21.1.1.6.1 i <value>
Start monitoring CX/Memotec routing/switching equipment (IP frame filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFLT-IP-MIB::cxFltIpParameter OID value, configure state conditions and alerts, and monitor any CX/Memotec routing/switching equipment (IP frame filtering) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.21 | cxFltIp | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.21.1 | cxFltIpAddrTable | CXFLT-IP-MIB |
| 1.3.6.1.4.1.495.2.1.6.21.1.1 | cxFltIpAddrEntry | CXFLT-IP-MIB |
| 1.3.6.1.4.1.495.2.1.6.21.1.1.6 | cxFltIpParameter | CXFLT-IP-MIB |