All MIBs › CXCFG-BR-MIB › cxCfgSrBasePortSubnetworkSapAlias
cxCfgSrBasePortSubnetworkSapAlias
Module: CXCFG-BR-MIB
OID (symbolic): CXCFG-BR-MIB::cxCfgSrBasePortSubnetworkSapAlias
OID (numeric): 1.3.6.1.4.1.495.2.1.6.17.1.1.3
Node type: OBJECT-TYPE
Type: Alias
Access: read-write
Description: Specifies a name (alias) for the physical or convergence port to which this SR port binds in order to establish a circuit for transmission. This value must match a physical or convergence port's alias as defined by the object cxLanIoPortAlias of the cxLanIoPortTable or by the object cxConvPortAlias of the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of letters and numbers however, you cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrative
What is cxCfgSrBasePortSubnetworkSapAlias?
This read-write Alias value names the physical or convergence port that this SR bridge port binds to for establishing a transmission circuit. The alias must match one already defined via cxLanIoPortAlias or cxConvPortAlias, so admins use it to associate an SR bridge port with a specific physical port by name. An admin configuring source-route bridging on a second LAN interface might set this to "LAN-PORT2" instead of the default "LAN-PORT1".
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.17.1.1.3 snmpwalk -v2c -c public <target> CXCFG-BR-MIB::cxCfgSrBasePortSubnetworkSapAlias
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.17.1.1.3.1 snmpget -v2c -c public <target> CXCFG-BR-MIB::cxCfgSrBasePortSubnetworkSapAlias.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.17.1.1.3.1 s <value>
Start monitoring Aastra enterprise switch/bridge (Layer 2 bridging config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXCFG-BR-MIB::cxCfgSrBasePortSubnetworkSapAlias OID value, configure state conditions and alerts, and monitor any Aastra enterprise switch/bridge (Layer 2 bridging config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.17 | cxCfgSrBase | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.17.1 | cxCfgSrBasePortTable | CXCFG-BR-MIB |
| 1.3.6.1.4.1.495.2.1.6.17.1.1 | cxCfgSrBasePortEntry | CXCFG-BR-MIB |
| 1.3.6.1.4.1.495.2.1.6.17.1.1.3 | cxCfgSrBasePortSubnetworkSapAlias | CXCFG-BR-MIB |