All MIBs › CXCFG-BR-MIB › cxCfgDot1dBasePortSubnetworkSapAlias
cxCfgDot1dBasePortSubnetworkSapAlias
Module: CXCFG-BR-MIB
OID (symbolic): CXCFG-BR-MIB::cxCfgDot1dBasePortSubnetworkSapAlias
OID (numeric): 1.3.6.1.4.1.495.2.1.6.14.3.1.3
Node type: OBJECT-TYPE
Type: Alias
Access: read-write
Description: Specifies a name (alias) for the physical or convergence port to which this port binds in order to establish a circuit for transmission. This value must match a physical or convergence port's alias, as defined by the cxLanIoPortAlias object in the cxLanIoPortTable or by the object cxConvPortAlias in the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of letters and numbers however, you cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrative
What is cxCfgDot1dBasePortSubnetworkSapAlias?
This read-write Alias value names the physical or convergence port that this STP bridge port binds to in order to establish a transmission circuit. The value must match an existing alias defined elsewhere, either cxLanIoPortAlias or cxConvPortAlias, so admins use it to wire a bridge port to a specific physical LAN or WAN port by name rather than by raw index. An admin might set this to "LAN-PORT2" to bind the STP bridge port to the second physical LAN port instead of the default "LAN-PORT1".
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.14.3.1.3 snmpwalk -v2c -c public <target> CXCFG-BR-MIB::cxCfgDot1dBasePortSubnetworkSapAlias
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.14.3.1.3.1 snmpget -v2c -c public <target> CXCFG-BR-MIB::cxCfgDot1dBasePortSubnetworkSapAlias.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.14.3.1.3.1 s <value>
Start monitoring Aastra enterprise switch/bridge (Layer 2 bridging config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXCFG-BR-MIB::cxCfgDot1dBasePortSubnetworkSapAlias OID value, configure state conditions and alerts, and monitor any Aastra enterprise switch/bridge (Layer 2 bridging config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.14 | cxCfgDot1dBase | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.14.3 | cxCfgDot1dBasePortTable | CXCFG-BR-MIB |
| 1.3.6.1.4.1.495.2.1.6.14.3.1 | cxCfgDot1dBasePortEntry | CXCFG-BR-MIB |
| 1.3.6.1.4.1.495.2.1.6.14.3.1.3 | cxCfgDot1dBasePortSubnetworkSapAlias | CXCFG-BR-MIB |