All MIBs › CTRON-WAN-MIB › ctWanHDSLHLUTestResult
ctWanHDSLHLUTestResult
Module: CTRON-WAN-MIB
OID (symbolic): CTRON-WAN-MIB::ctWanHDSLHLUTestResult
OID (numeric): 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Test result for the local line unit (1 - test failed, 0 - success): bit 0 - 2180 DS1 frame sync test (HiGain only) 1 - 2180 DS1 data test (HiGain only) 2 - LIU DS1 frame sync test (HiGain only) 3 - LIU DS1 data test (HiGain only) 4 - External DS1 frame sync test (HiGain only) 5 - External DS1 data test. 6 - Mux sync test on HDSL LOOP 1 7 - Mux sync test on HDSL LOOP 2 8 - Reserved. 9 - Mux frame error test on HDSL LOOP 1 10 - Mux frame error test on HDSL LOOP 2 11 - Mux CRC test on HDSL LOOP 1 12 - Mux CRC test on HDSL LOOP 2 13 - Mux DL test on HDSL LOOP 1 14 - Mux DL test on HDSL LOOP 2 15 - Analog loopback test. 16 - Digital loop test. 17 - HGF HDSL loop test (HiGain only) 18 - HGF write/readback test (HiGain only) 19 - HGF poll lock test (HiGain only). 20 - HGF activity monitor test (HiGain only). 21 - HGF zeroes TX and detect test (HiGain only). 22 - HGF ones TX and detect test (HiGain only). 23 - Transceiver poll test on HDSL LOOP 1 24 - Transceiver poll test on HDSL LOOP 2 25 - PROM check test. 26 - External RAM test. 27 - Non-Volatile RAM test.
What is ctWanHDSLHLUTestResult?
A bitmask of pass/fail results for the local HDSL line unit's diagnostic tests (DS1 frame sync, mux sync/CRC/DL on each loop, analog/digital loopback, PROM/RAM checks, and more), where each bit set to 1 means that specific test failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3 snmpwalk -v2c -c public <target> CTRON-WAN-MIB::ctWanHDSLHLUTestResult
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3.1 snmpget -v2c -c public <target> CTRON-WAN-MIB::ctWanHDSLHLUTestResult.1
Start monitoring Cabletron/Enterasys router (WAN/DDS interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-WAN-MIB::ctWanHDSLHLUTestResult OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (WAN/DDS interface) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7 | ctronWan | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.1 | ctWan | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.1.8 | ctWanHDSLExt | CTRON-WAN-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4 | ctWanHDSLTestTable | CTRON-WAN-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1 | ctWanHDSLTestEntry | CTRON-WAN-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3 | ctWanHDSLHLUTestResult | CTRON-WAN-MIB |