CTRON-VLAN-EXTENSIONS-MIB :: ctVlanSupportedPortNum

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CTRON-VLAN-EXTENSIONS-MIB › ctVlanSupportedPortNum

ctVlanSupportedPortNum

Module: CTRON-VLAN-EXTENSIONS-MIB

OID (symbolic): CTRON-VLAN-EXTENSIONS-MIB::ctVlanSupportedPortNum

OID (numeric): 1.3.6.1.4.1.52.4.1.2.16.1.6.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The set of ports on the device, specified by ctVlanSupportedSlotNum, that support VLANs. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is ctVlanSupportedPortNum?

A bitmap flagging which ports on the slot (ctVlanSupportedSlotNum) support VLAN tagging at all -- the most significant bit of the first octet covers port 1, and so on; an admin checks this before trying to assign a port to a VLAN to confirm the hardware supports it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.16.1.6.1.2
snmpwalk -v2c -c public <target> CTRON-VLAN-EXTENSIONS-MIB::ctVlanSupportedPortNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.16.1.6.1.2.1
snmpget -v2c -c public <target> CTRON-VLAN-EXTENSIONS-MIB::ctVlanSupportedPortNum.1

Start monitoring Cabletron Systems 802.1Q-compliant switch (VLAN extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-VLAN-EXTENSIONS-MIB::ctVlanSupportedPortNum OID value, configure state conditions and alerts, and monitor any Cabletron Systems 802.1Q-compliant switch (VLAN extensions) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.2.16ctVlanExtCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.16.1ctVlanBridgeConfigCTRON-VLAN-EXTENSIONS-MIB
1.3.6.1.4.1.52.4.1.2.16.1.6ctVlanSupportedPortTableCTRON-VLAN-EXTENSIONS-MIB
1.3.6.1.4.1.52.4.1.2.16.1.6.1ctVlanSupportedPortEntryCTRON-VLAN-EXTENSIONS-MIB
1.3.6.1.4.1.52.4.1.2.16.1.6.1.2ctVlanSupportedPortNumCTRON-VLAN-EXTENSIONS-MIB