All MIBs › CTRON-VLAN-EXTENSIONS-MIB › ctVlanPortVID
ctVlanPortVID
Module: CTRON-VLAN-EXTENSIONS-MIB
OID (symbolic): CTRON-VLAN-EXTENSIONS-MIB::ctVlanPortVID
OID (numeric): 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The 12 bit Port VLAN Identifier (PVID) associated with the configured VLAN for received untagged packets on the port specified by ctVlanPortNum. The port specified by ctVlanPortNum will be added to the egress list (ctVlanEgressList) for the specified VLAN with the frame type of untagged, via ctVlanEgressUntaggedList. The port will be removed from the egress list of the previous PVID. The exception to this is the DEFAULT VLAN (VID 1) when the ctVlanDefaultVIDStickyEgress is set to a value of enable(1). Additionally the ctVlanStatus of the specified VLAN will be set to a value of enable(1). A set of value that does not exist in the ctVlanConfigTable will fail with a NO-INSTANCE error.
What is ctVlanPortVID?
Sets the Port VLAN Identifier (PVID) the port assigns to untagged incoming frames; for example, setting this to 20 makes the port an untagged access port for VLAN 20, adding it to that VLAN's egress list and removing it from the previous PVID's list (unless ctVlanDefaultVIDStickyEgress keeps it in VLAN 1). The target VLAN must already exist in ctVlanConfigTable or the set fails with a NO-INSTANCE error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3 snmpwalk -v2c -c public <target> CTRON-VLAN-EXTENSIONS-MIB::ctVlanPortVID
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3.1 snmpget -v2c -c public <target> CTRON-VLAN-EXTENSIONS-MIB::ctVlanPortVID.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3.1 i <value>
Start monitoring Cabletron Systems 802.1Q-compliant switch (VLAN extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-VLAN-EXTENSIONS-MIB::ctVlanPortVID OID value, configure state conditions and alerts, and monitor any Cabletron Systems 802.1Q-compliant switch (VLAN extensions) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.16 | ctVlanExt | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.16.3 | ctVlanPortConfig | CTRON-VLAN-EXTENSIONS-MIB |
| 1.3.6.1.4.1.52.4.1.2.16.3.1 | ctVlanPortConfigTable | CTRON-VLAN-EXTENSIONS-MIB |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1 | ctVlanPortConfigEntry | CTRON-VLAN-EXTENSIONS-MIB |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3 | ctVlanPortVID | CTRON-VLAN-EXTENSIONS-MIB |