CTRON-TRANSLATION-MIB :: ctTransSrExpMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-TRANSLATION-MIBctTransSrExpMode

ctTransSrExpMode

Module: CTRON-TRANSLATION-MIB

OID (symbolic): CTRON-TRANSLATION-MIB::ctTransSrExpMode

OID (numeric): 1.3.6.1.4.1.52.4.1.3.4.7.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object selects the type of explorer frame the SR or SRT interface will use, if and when an explorer frame is required. This object is only applicable when ctTransSrIfMode is set to sr (2) or srt (3). The requirements will depend on the device being managed.

The inboundtype option (4) is supported only on those devices with the ability to 'remember' the original state of the arriving explorer packet. When set for this option the device will configure all outbound explorer frames for whichever type of explorer (ARE or STE) it arrived as.

The default value for this object is product specific. A write of notsupported (1) will have no affect.

What is ctTransSrExpMode?

Chooses which explorer frame type an SR or SRT interface sends when one is needed: ARE, STE, or (with inboundtype) whichever type the original request arrived as, on devices that can remember that. Only applies when ctTransSrIfMode is set to sr or srt.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.7.1.1.3
snmpwalk -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransSrExpMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.7.1.1.3.1
snmpget -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransSrExpMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.3.4.7.1.1.3.1 i <value>

Start monitoring Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-TRANSLATION-MIB::ctTransSrExpMode OID value, configure state conditions and alerts, and monitor any Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3ctNetworkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3.4ctTranslationCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.3.4.7ctTransSrCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.7.1ctTransSrTableCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.7.1.1ctTransSrEntryCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.7.1.1.3ctTransSrExpModeCTRON-TRANSLATION-MIB