CTRON-TRANSLATION-MIB :: ctTransLfpsAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-TRANSLATION-MIBctTransLfpsAdminStatus

ctTransLfpsAdminStatus

Module: CTRON-TRANSLATION-MIB

OID (symbolic): CTRON-TRANSLATION-MIB::ctTransLfpsAdminStatus

OID (numeric): 1.3.6.1.4.1.52.4.1.3.4.12.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When large(1) is the setting all large frames are permissable out that port. fragment_if_possible(2) is used when the outport wants ip frames fragmented before transmission. All other non fragmentable large frames will be transmitted large. small(3) requires that no large frames be transmitted out this interface. If a frame can be fragmented then it can be transmitted out the interface. auto(4) is a special setting that will allow a device to negotiate which of the other three settings to use as the operational mode.

The default of this object is product specific.

What is ctTransLfpsAdminStatus?

Sets how this outbound port handles large frames: large permits all oversized frames through, fragment-if-possible fragments large IP frames before sending while still forwarding other non-fragmentable large frames whole, small requires no large frames leave the port (fragmenting where possible), and auto lets the device negotiate which of those three modes to actually use.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.12.1.1.2
snmpwalk -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransLfpsAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.12.1.1.2.1
snmpget -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransLfpsAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.3.4.12.1.1.2.1 i <value>

Start monitoring Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-TRANSLATION-MIB::ctTransLfpsAdminStatus OID value, configure state conditions and alerts, and monitor any Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3ctNetworkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3.4ctTranslationCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.3.4.12ctTranslfpsCfgCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.12.1ctTransLfpsTableCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.12.1.1ctTransLfpsEntryCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.12.1.1.2ctTransLfpsAdminStatusCTRON-TRANSLATION-MIB