CTRON-TRANSLATION-MIB :: ctTransFddiEthernetAuto

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-TRANSLATION-MIBctTransFddiEthernetAuto

ctTransFddiEthernetAuto

Module: CTRON-TRANSLATION-MIB

OID (symbolic): CTRON-TRANSLATION-MIB::ctTransFddiEthernetAuto

OID (numeric): 1.3.6.1.4.1.52.4.1.3.4.2.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enables or disables the 'Auto-Learn' Translation feature of FDDI to Ethernet frames for the objects below. If enabled, the device will automatically learn the frame type by source address from the Ethernet interfaces. If enabled, IPX FDDI frames destined to a learned source address will be translated to the appropriate frame type. If the Ethernet destination address has not been heard from, therefore the frame type used is unknown, the device default frame translation for that frame type will be used.

What is ctTransFddiEthernetAuto?

Turns on 'Auto-Learn' translation, where the device watches source addresses arriving on its Ethernet interfaces to figure out which frame type the objects below should use for IPX FDDI traffic bound for each address. If a destination hasn't been learned yet, the device falls back to its configured default frame type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.2.3
snmpwalk -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransFddiEthernetAuto

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.4.2.3.1
snmpget -v2c -c public <target> CTRON-TRANSLATION-MIB::ctTransFddiEthernetAuto.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.3.4.2.3.1 i <value>

Start monitoring Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-TRANSLATION-MIB::ctTransFddiEthernetAuto OID value, configure state conditions and alerts, and monitor any Cabletron LAN switch/bridge (Ethernet-Token Ring translational bridging) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3ctNetworkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.3.4ctTranslationCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.3.4.2ctTransFddiEthernetCTRON-TRANSLATION-MIB
1.3.6.1.4.1.52.4.1.3.4.2.3ctTransFddiEthernetAutoCTRON-TRANSLATION-MIB