All MIBs › CTRON-SSR-L2-MIB › l2ForwardInPorts
l2ForwardInPorts
Module: CTRON-SSR-L2-MIB
OID (symbolic): CTRON-SSR-L2-MIB::l2ForwardInPorts
OID (numeric): 1.3.6.1.4.1.52.2501.1.2.4.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The set of physical ports to which this entry is contained in the L2 tables. Each octet within the value of this object specifies a set of eight ports. The first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.
Within each octet, the least significant bit represents the lowest numbered port and the most significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length. The maximum number of ports/card-module is sysHwModuleNumPorts.
What is l2ForwardInPorts?
In the L2 forward table, this is a bitmap of the physical ports this entry is present on, with each octet covering eight ports and a set bit meaning the port is included; it defaults to all zeroes. Admins decode it bit-by-bit to see the exact set of ports a forwarding entry spans.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.2501.1.2.4.1.6 snmpwalk -v2c -c public <target> CTRON-SSR-L2-MIB::l2ForwardInPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.2501.1.2.4.1.6.1 snmpget -v2c -c public <target> CTRON-SSR-L2-MIB::l2ForwardInPorts.1
Start monitoring Cabletron/Enterasys Smart Switch Router (SSR) — legacy/deprecated (Layer 2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-SSR-L2-MIB::l2ForwardInPorts OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys Smart Switch Router (SSR) — legacy/deprecated (Layer 2) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.2501 | ssr | CTRON-SSR-SMI-MIB |
| 1.3.6.1.4.1.52.2501.1 | ssrMibs | CTRON-SSR-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.2501.1.2 | l2Group | CTRON-SSR-L2-MIB |
| 1.3.6.1.4.1.52.2501.1.2.4 | l2ForwardTable | CTRON-SSR-L2-MIB |
| 1.3.6.1.4.1.52.2501.1.2.4.1 | l2ForwardEntry | CTRON-SSR-L2-MIB |
| 1.3.6.1.4.1.52.2501.1.2.4.1.6 | l2ForwardInPorts | CTRON-SSR-L2-MIB |