CTRON-SSR-L2-MIB :: l2FilterOutPorts

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CTRON-SSR-L2-MIB › l2FilterOutPorts

l2FilterOutPorts

Module: CTRON-SSR-L2-MIB

OID (symbolic): CTRON-SSR-L2-MIB::l2FilterOutPorts

OID (numeric): 1.3.6.1.4.1.52.2501.1.2.6.1.9

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The set of ports which allow this destination MAC address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length.

What is l2FilterOutPorts?

In the L2 filter table, this is a bitmap of the physical ports allowed as outbound destinations for this filter's matching MAC address. Admins pair it with l2FilterInPorts to fully define which ports traffic matching this filter may enter and exit through.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.2501.1.2.6.1.9
snmpwalk -v2c -c public <target> CTRON-SSR-L2-MIB::l2FilterOutPorts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.2501.1.2.6.1.9.1
snmpget -v2c -c public <target> CTRON-SSR-L2-MIB::l2FilterOutPorts.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.2501.1.2.6.1.9.1 s <value>

Start monitoring Cabletron/Enterasys Smart Switch Router (SSR) — legacy/deprecated (Layer 2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-SSR-L2-MIB::l2FilterOutPorts OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys Smart Switch Router (SSR) — legacy/deprecated (Layer 2) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.2501ssrCTRON-SSR-SMI-MIB
1.3.6.1.4.1.52.2501.1ssrMibsCTRON-SSR-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.2501.1.2l2GroupCTRON-SSR-L2-MIB
1.3.6.1.4.1.52.2501.1.2.6l2FilterTableCTRON-SSR-L2-MIB
1.3.6.1.4.1.52.2501.1.2.6.1l2FilterEntryCTRON-SSR-L2-MIB
1.3.6.1.4.1.52.2501.1.2.6.1.9l2FilterOutPortsCTRON-SSR-L2-MIB