All MIBs › CTRON-SFPS-MCAST-MIB › sfpsMcastConfigApiRefreshInterval
sfpsMcastConfigApiRefreshInterval
Module: CTRON-SFPS-MCAST-MIB
OID (symbolic): CTRON-SFPS-MCAST-MIB::sfpsMcastConfigApiRefreshInterval
OID (numeric): 1.3.6.1.4.1.52.4.2.4.2.5.4.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This is the interval at which sender announcements will be transmitted by the switch that the sender is locally attached. All sender refreshes will occur within 12 seconds. If this number is set to 60, 1/2 of the senders will be announced every 60 seconds. If this number is 30, 1/4 of the senders will be announced every 30 seconds. If the number of senders grows, the refresh interval may have to be adjusted shorter. The fine tuning is to determine which is better, fewer-bigger announcements, or more-smaller announcements. Value will not take effect until blade is reset.
What is sfpsMcastConfigApiRefreshInterval?
This OID sets the interval at which the switch local to a multicast sender re-announces that sender, with all senders refreshed within 12 seconds regardless of the exact value (e.g. a setting of 60 announces half the senders every 60 seconds). An admin shortens this as the number of active senders grows, to balance announcement traffic size versus frequency; it requires a blade reset to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.4.2.5.4.1.7 snmpwalk -v2c -c public <target> CTRON-SFPS-MCAST-MIB::sfpsMcastConfigApiRefreshInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.4.2.5.4.1.7.1 snmpget -v2c -c public <target> CTRON-SFPS-MCAST-MIB::sfpsMcastConfigApiRefreshInterval.1
Start monitoring Cabletron SecureFast Packet Switch (SFPS), multicast forwarding with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-SFPS-MCAST-MIB::sfpsMcastConfigApiRefreshInterval OID value, configure state conditions and alerts, and monitor any Cabletron SecureFast Packet Switch (SFPS), multicast forwarding from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.4 | ctronSwitch | CTRON-SFPS-INCLUDE-MIB |
| 1.3.6.1.4.1.52.4.2.4.2 | switchSFPS | CTRON-SFPS-INCLUDE-MIB |
| 1.3.6.1.4.1.52.4.2.4.2.5 | sfpsMulticast | CTRON-SFPS-INCLUDE-MIB |
| 1.3.6.1.4.1.52.4.2.4.2.5.4 | sfpsMcastConfig | CTRON-SFPS-INCLUDE-MIB |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1 | sfpsMcastConfigApi | CTRON-SFPS-INCLUDE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.7 | sfpsMcastConfigApiRefreshInterval | CTRON-SFPS-MCAST-MIB |