All MIBs › CTRON-REMOTE-ACCESS-MIB › ds1AlarmGlobalBPVErrorRate
ds1AlarmGlobalBPVErrorRate
Module: CTRON-REMOTE-ACCESS-MIB
OID (symbolic): CTRON-REMOTE-ACCESS-MIB::ds1AlarmGlobalBPVErrorRate
OID (numeric): 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmGlobalBPVInterval. For example, for a ds1AlarmGlobalBPVErrorRate value of 6 used with a ds1AlarmGlobalBPVInterval of 15, an alarm is generated when a 15 minute period has an average error rate which exceeds 1 Bipolar Violation (Code Violation for E1) per million bits. For those devices that support ds1 alarm monitoring but who's hardware does not support detect bipolar violations, this object always returns the default, and performs no action when written.
What is ds1AlarmGlobalBPVErrorRate?
The global Bipolar Violation (Code Violation for E1) alarm threshold, expressed as a negative power of 10 (5-9, default 6); e.g. a value of 6 with a 15-minute interval means an alarm fires if the average error rate over 15 minutes exceeds 1 violation per million bits. Devices whose hardware can't detect bipolar violations always report the default and ignore writes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6 snmpwalk -v2c -c public <target> CTRON-REMOTE-ACCESS-MIB::ds1AlarmGlobalBPVErrorRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6.1 snmpget -v2c -c public <target> CTRON-REMOTE-ACCESS-MIB::ds1AlarmGlobalBPVErrorRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6.1 i <value>
Start monitoring Cabletron/Enterasys remote-access server (dial-in/ISDN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-REMOTE-ACCESS-MIB::ds1AlarmGlobalBPVErrorRate OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys remote-access server (dial-in/ISDN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7 | ctronWan | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2 | ctRemoteAccess | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.2.8 | ctDs1Alarms | CTRON-REMOTE-ACCESS-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1 | ds1AlarmsGlobalConfigGroup | CTRON-REMOTE-ACCESS-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6 | ds1AlarmGlobalBPVErrorRate | CTRON-REMOTE-ACCESS-MIB |