All MIBs › CTRON-REMOTE-ACCESS-MIB › ctDDSLineMode
ctDDSLineMode
Module: CTRON-REMOTE-ACCESS-MIB
OID (symbolic): CTRON-REMOTE-ACCESS-MIB::ctDDSLineMode
OID (numeric): 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DDS-PRI is full duplex 56k link, No framing in loop data so loop speed is also 56k. Data stream: --d1 d2 d3 d4 d5 d6 d7-- DDS-SC is also full duplex 56k link, requires framing bits to distinguish between primary and secondary channels. --d1 d2 d3 d4 d5 d6 d7 F C/S-- where F is framing bit and C/S for secondary channel as well as used for control bit. With these two extra bits the loop speed is increased to 72k. primary channel rate is 56k.
DDS-CC is full duplex 64k link. Does not require framing bit but uses a same format as SC, nineth bit position is lumped with primary channel and not used for control. Loop speed is 72k, Primary channel rate is 64k. --d1 d2 d3 d4 d5 d6 d7 F d8--
What is ctDDSLineMode?
Selects the DDS line format: ddsPri (56k primary channel only, no framing), ddsSc (56k primary plus a secondary/control channel using extra framing bits, 72k loop speed), or ddsCc (64k primary channel, 72k loop speed, no separate control bit); choose the mode that matches what the carrier's DDS circuit is provisioned for.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3 snmpwalk -v2c -c public <target> CTRON-REMOTE-ACCESS-MIB::ctDDSLineMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3.1 snmpget -v2c -c public <target> CTRON-REMOTE-ACCESS-MIB::ctDDSLineMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ctDDSLineMode.1
Start monitoring Cabletron/Enterasys remote-access server (dial-in/ISDN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-REMOTE-ACCESS-MIB::ctDDSLineMode OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys remote-access server (dial-in/ISDN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7 | ctronWan | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2 | ctRemoteAccess | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.2.5 | ctDDSExt | CTRON-REMOTE-ACCESS-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1 | ctDDSConfigTable | CTRON-REMOTE-ACCESS-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1 | ctDDSConfigEntry | CTRON-REMOTE-ACCESS-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3 | ctDDSLineMode | CTRON-REMOTE-ACCESS-MIB |