All MIBs › CTRON-PORTMAP-MIB › portMapOperationalMode
portMapOperationalMode
Module: CTRON-PORTMAP-MIB
OID (symbolic): CTRON-PORTMAP-MIB::portMapOperationalMode
OID (numeric): 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the current operational mode of this port. This value is a logical OR of the current operational mode, where each technology is given the values below:
other(1) Undefined, or ability not known Auto-Negotiation(2) Auto-Negotiation 10BASE-T(4) 10BASE-T 100BASE-TX(8) 100BASE-TX 1000BASE(16) 1000BASE
For example, a port that has auto-negotiated to a speed of 100BASE-TX would have a value of 10 (2 + 8).
What is portMapOperationalMode?
This value reports, and can be used to set, the technology the port is actually operating at right now, encoded the same bitmask way as portMapCapability but reflecting the port's active mode rather than its full hardware capability. An admin compares this against portMapCapability to see whether a port negotiated to its best possible speed or is running below its potential. For example, a value of 10 (2+8) shows the port auto-negotiated to 100BASE-TX operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4 snmpwalk -v2c -c public <target> CTRON-PORTMAP-MIB::portMapOperationalMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4.1 snmpget -v2c -c public <target> CTRON-PORTMAP-MIB::portMapOperationalMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4.1 i <value>
Start monitoring Cabletron legacy repeater/hub hardware (port-to-repeater mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-PORTMAP-MIB::portMapOperationalMode OID value, configure state conditions and alerts, and monitor any Cabletron legacy repeater/hub hardware (port-to-repeater mapping) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.16 | ctPortMap | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.16.1 | portMap | CTRON-PORTMAP-MIB |
| 1.3.6.1.4.1.52.4.1.1.16.1.1 | portMapTable | CTRON-PORTMAP-MIB |
| 1.3.6.1.4.1.52.4.1.1.16.1.1.1 | portMapEntry | CTRON-PORTMAP-MIB |
| 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4 | portMapOperationalMode | CTRON-PORTMAP-MIB |