All MIBs › CTRON-IF-REMAP-MIB › ctIfRemapTableEnable
ctIfRemapTableEnable
Module: CTRON-IF-REMAP-MIB
OID (symbolic): CTRON-IF-REMAP-MIB::ctIfRemapTableEnable
OID (numeric): 1.3.6.1.4.1.52.4.1.1.13.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object places the device into the correct mode to allow for interface remapping.
Setting this object to enable(1) configures the device to allow ifremapping.
Setting this object to disable(2) configures the device to disallow ifremapping.
A value of unsupported(3) indicates that this device does not require any special configuration to allow for interface remapping.
What is ctIfRemapTableEnable?
This object places the device into the mode required to perform interface remapping at all, independent of the individual entries in the remap table. Admins set this to enable(1) before configuring or activating any individual source/destination remap rows, since without it the feature is not engaged device-wide. For example, setting this to disable(2) configures the device to stop allowing any interface remapping regardless of what rows exist in the table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.13.5 snmpwalk -v2c -c public <target> CTRON-IF-REMAP-MIB::ctIfRemapTableEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.13.5.1 snmpget -v2c -c public <target> CTRON-IF-REMAP-MIB::ctIfRemapTableEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.13.5.1 i <value>
Start monitoring Cabletron modular chassis switch (interface remap) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-IF-REMAP-MIB::ctIfRemapTableEnable OID value, configure state conditions and alerts, and monitor any Cabletron modular chassis switch (interface remap) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.13 | ctIFRemap | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.13.5 | ctIfRemapTableEnable | CTRON-IF-REMAP-MIB |