All MIBs › CTRON-IF-REMAP-2-MIB › ctIFRemap2Status
ctIFRemap2Status
Module: CTRON-IF-REMAP-2-MIB
OID (symbolic): CTRON-IF-REMAP-2-MIB::ctIFRemap2Status
OID (numeric): 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the status of the ifremap entry. Setting ctIFRemap2Status to a value of enable(1) has the effect of creating an entry in the table when it does not already exist. Setting ctIFRemap2Status to a value of disable(2) disables the entry and deletes the row from the table. Therefore this table only contains entries that are active.
What is ctIFRemap2Status?
This value controls whether a given source-to-destination remap row is active, with enable(1) creating the row and disable(2) both disabling and deleting it from the table. Because a disable actually removes the row rather than just deactivating it, this is the only supported way, via SNMP, to add or remove an ifremap relationship. For example, an admin sets ctIFRemap2Status to enable(1) for a slot1/port1-to-slot1/port3 entry to start mirroring, then to disable(2) later to tear the mapping down entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5 snmpwalk -v2c -c public <target> CTRON-IF-REMAP-2-MIB::ctIFRemap2Status
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5.1 snmpget -v2c -c public <target> CTRON-IF-REMAP-2-MIB::ctIFRemap2Status.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5.1 i <value>
Start monitoring Cabletron/Enterasys modular chassis switch (interface remap v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-IF-REMAP-2-MIB::ctIFRemap2Status OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys modular chassis switch (interface remap v2) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.14 | ctIFRemap2 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.14.1 | ctIFRemap2Config | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1 | ctIFRemap2Table | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1 | ctIFRemap2Entry | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5 | ctIFRemap2Status | CTRON-IF-REMAP-2-MIB |