All MIBs › CTRON-IF-REMAP-2-MIB › ctIFRemap2EgressType
ctIFRemap2EgressType
Module: CTRON-IF-REMAP-2-MIB
OID (symbolic): CTRON-IF-REMAP-2-MIB::ctIFRemap2EgressType
OID (numeric): 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines how each packet will be tagged when sent out the ctIFRemap2DestPort. Setting ctIFRemap2EgressType to normal(1) will set packets to be sent out as they are seen by ctIFRemap2SourcePort. Setting ctIFRemap2EgressType to alwaysTagged(2) will set packets to always be sent out ctIFRemap2DestSlot and ctIFRemap2DestPort with a tag. Setting ctIFRemap2EgressType to alwaysUntagged(3) will set packets to always be sent out ctIFRemap2DestSlot and ctIFRemap2DestPort without a tag. If the module is not configured to support packet tagging (i.e. 802.1d bridge mode) then setting this object to alwaysTagged(2) or alwaysUntagged(3) will return a BAD-VALUE error.
What is ctIFRemap2EgressType?
This value determines how frames are VLAN-tagged when transmitted out the destination port for this remap entry: unchanged as received (normal), always tagged, or always untagged. Admins use alwaysTagged or alwaysUntagged to force a consistent tag state on the mirrored copy regardless of how the frame arrived on the source port, though on an 802.1d-only bridge these two settings are rejected with a BAD-VALUE error. For example, setting it to alwaysUntagged(3) ensures every frame remapped out the destination port arrives untagged even if it was originally 802.1Q tagged on the source.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7 snmpwalk -v2c -c public <target> CTRON-IF-REMAP-2-MIB::ctIFRemap2EgressType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7.1 snmpget -v2c -c public <target> CTRON-IF-REMAP-2-MIB::ctIFRemap2EgressType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7.1 i <value>
Start monitoring Cabletron/Enterasys modular chassis switch (interface remap v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-IF-REMAP-2-MIB::ctIFRemap2EgressType OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys modular chassis switch (interface remap v2) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.14 | ctIFRemap2 | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.14.1 | ctIFRemap2Config | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1 | ctIFRemap2Table | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1 | ctIFRemap2Entry | CTRON-IF-REMAP-2-MIB |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7 | ctIFRemap2EgressType | CTRON-IF-REMAP-2-MIB |