All MIBs › CTRON-ETHERNET-PARAMETERS-MIB › ctEtherSupportedPauseModes
ctEtherSupportedPauseModes
Module: CTRON-ETHERNET-PARAMETERS-MIB
OID (symbolic): CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSupportedPauseModes
OID (numeric): 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This indicates the frame based modes of full duplex flow control for this port.
The value is a sum. This sum initially takes the value zero. Then, for each mode, M, that the port supports, 2 raised to (M - 1) is added to the sum. For example, a port that supports Symmetric (M= 2), AsymmetricRX (M = 3) and AsymmetricTx (M = 4) would return a value of 14 ((2 ^ (2 - 1)) + (2 ^ (3 - 1)) + (2 ^ (4 - 1))).
Speed values should be calculated as follows:
M Mode Description -- ------------ ------------------------------------------------ 1 Other None of the following 2 Symmetric Receive and Transmit Pause Frames 3 AsymmetricRx Receive Pause Frames 4 AsymmetricTx Transmit Pause Frames
What is ctEtherSupportedPauseModes?
This is a bitmask-encoded sum indicating which full-duplex PAUSE-frame flow-control modes, such as symmetric or asymmetric receive and transmit, this port's hardware supports. It tells an admin what pause-frame capabilities are even possible before attempting to configure ctFlowCtlPauseAdminStatus. For example, a value of 14 decodes to support for symmetric, asymmetric-receive, and asymmetric-transmit pause modes all being available on this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.3 snmpwalk -v2c -c public <target> CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSupportedPauseModes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.3.1 snmpget -v2c -c public <target> CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSupportedPauseModes.1
Start monitoring Cabletron Systems Ethernet switch/hub (auto-negotiation config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSupportedPauseModes OID value, configure state conditions and alerts, and monitor any Cabletron Systems Ethernet switch/hub (auto-negotiation config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.4 | ctEthernet | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.4.2 | ctEthernetCtlParameters | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.4.2.2 | ctFlowControl | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1 | ctFlowCtlTable | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1 | ctFlowCtlEntry | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.3 | ctEtherSupportedPauseModes | CTRON-ETHERNET-PARAMETERS-MIB |